Q32系固定式、履帶式拋丸清洗機

◆產品的特征 Product features

本輪式拋丸快速清理機合適多品類，大中批量化生產的鑄件的的表面除銹防銹或拋丸升級，快速清理鑄件都要都不怕碰撞檢測的單重在150kg下面的鑄件及熱進行處理件，機械既可單人選用，又可配線選用. 專屬制作機誡范圍之內。

自行：將鏜孔產品產品表層放進去塑膠履帶滾筒設備中，實際操作技術人員按“啟動”按紐，拋丸室門油路分配器關閉系統，拋丸徹底清除開始了，履帶的向前啟動，鏜孔產品產品表層不息地展開翻滾，雙固拋丸器將拋丸迅速拋噴到就在翻滾的鏜孔產品產品表層表層上，鏜孔產品產品表層可齊全均地得到了徹底清除。鋼丸在履隨身攜帶的溜孔流通量旋轉鏈板輸料機機，再將鋼丸鏈板輸料機到斗式上升機，經斗式上升機上升到區分出來器，被區分出來后數據存儲備用。拋丸結束了之后，拋丸室門自行啟閉，履帶轉反，將鏜孔產品產品表層卸出。

手動式：機用戶是根據高速路轉回的風輪將彈丸拋向履帶內接連擺動的鏜孔上，而使完成進行清潔鏜孔的主要目的。它選于各業業中的微型鑄件、鍛件、冷沖模件、蝸輪蝸桿、扭簧等件的清砂、除銹設配、去鈍化皮和表層強化裝備。遠程服務器是結合國內的外方法，的設計發展的新成品，就是一種進行清潔高效率好、架構省油的suv、噪音小、電氣成套性好的進行清潔設配。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆的產品優缺點 Product features

1.遠程服務器按照了懸臂離心力式拋丸器，具備著使用的平均時間長和空間結構非常簡單等基本特征。

2.用到BE型分離器，都具有好的分離體驗和生育率，對增強樹葉有積極向上的功效。

3.運用袋式安裝除塵設備器，粉層排污酸度不低于國家地區規則的標，大麥田增強了實操者的勞動者室內環境。

4.運用耐腐天然橡膠履帶，減小了對產品的磕碰及磨損現象，降了服務器的噪音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆符合范圍內 Applicable scope

      壓鑄件、精密鑄造制造鑄件、精密鑄造制造鍛件等的消除、光飾。消除熱治理件、鑄件、鍛件的外壁氧化物皮。氣彈簧的升級。擰緊件除銹方法和前治理。

1、符合歐洲德國八十五時代末的通過式拋丸機實行國產a化生產加工。

2、通過直聯強效拋丸器，引入速率好，拋丸量大。

3、風選轉移器、丸砂轉移率超過99%。

4、彈丸覆蓋面均勻分布，無拋丸?盲區。

5、耐腐件操作質保期長，調換很快。

6、主設備工作噪音小源加載。

7、電氣產品按照繼電氣產品（或PLC）有效把握，有效把握柜、聲光控開關報警器安裝，PC所主要包括三凌企業品牌形象，主要是原電子器件所主要包括PLC合資車形象企業品牌形象操作步驟單純、是真的嗎。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆注意技能運作 Main technical parameters